Page 1 of 1
For the assembly shown, a yoke on a 30 mm diameter rod is attached to a 25 mm thick bracket via 15 mm diameter bolt as s
Posted: Tue Jul 05, 2022 8:55 am
by answerhappygod
- For The Assembly Shown A Yoke On A 30 Mm Diameter Rod Is Attached To A 25 Mm Thick Bracket Via 15 Mm Diameter Bolt As S 1 (217.68 KiB) Viewed 22 times
For the assembly shown, a yoke on a 30 mm diameter rod is attached to a 25 mm thick bracket via 15 mm diameter bolt as shown. An axial load P = 25 KN is applied on the rod. [Select] MPa)? [Select] diameter bolt (in kN)? [Select] [Select] MPa)? P [Select] d-30 mm t-25 mm d = 15 mm (a) What is the tensile axial stress on the rod (in (b) What is the internal shear force in the 15mm (c) What is the shear stress on the bolt (in MPa)? (d) What is the bearing stress on the bracket (in (e) If the shear stress in the bolt is limited to 45 MPa, what is the required minimum diameter of the bolt (in mm)?