Page 1 of 1
0 For TORQUE (Nm) 0 0.3 0.6 0.9 1.2 Dur ta 7... b t C. L Return the voltage to zero and turn off the power supply Roter
Posted: Sun Jul 03, 2022 12:02 pm
by answerhappygod
- 0 For Torque Nm 0 0 3 0 6 0 9 1 2 Dur Ta 7 B T C L Return The Voltage To Zero And Turn Off The Power Supply Roter 1 (105.87 KiB) Viewed 23 times
0 For TORQUE (Nm) 0 0.3 0.6 0.9 1.2 Dur ta 7... b t C. L Return the voltage to zero and turn off the power supply Roter Resistanc volt Rext=75√12 4 5 (amps) (amps) (amps) 0.23 0.22 0.29 0.30 0.29 0.32 -3 0.41 0.40 0.49 active power b) starting torque to full-load torque d) reactive power W, (watts) - 23 e) power factor f) mechanical output power W₂ (watts) Table 5.2. table when Belor 750 Couple the motor to the electrodynamometer with the timing belt Set the dynamometar mant g) efficiency X5 95 28 120 Rext = 75√2 4. Using the results of procedure 9 and Table 5-2, make the following ratio calculations (use the 0.9 N-m characteristics for the full-load values). a) starting current to full-load current SPEED (r/min) 1365 1173 950 not heef var W %