Page 1 of 1

Topology 1 10.1.13.0/24 R1 GO/0/1.1/::1 2001:db8:acad:10d1::/64 PC1 G1/0/23 .50/::50 vlan 50 "Group50" G1/0/11 -13/::d1

Posted: Sun Jul 03, 2022 11:59 am
by answerhappygod
Topology 1 10 1 13 0 24 R1 Go 0 1 1 1 2001 Db8 Acad 10d1 64 Pc1 G1 0 23 50 50 Vlan 50 Group50 G1 0 11 13 D1 1
Topology 1 10 1 13 0 24 R1 Go 0 1 1 1 2001 Db8 Acad 10d1 64 Pc1 G1 0 23 50 50 Vlan 50 Group50 G1 0 11 13 D1 1 (127.06 KiB) Viewed 20 times
Part 5: Configure DHCPv4
a. Configure DHCPv4 on R3 VLAN 85 withthe addresses specified in the Addressing Table.
i. Configure R3 toexclude the first 50 addresses from the VLAN 85.
ii. Create a DHCP pool namedR3-VLAN85 (case-sensitive).
iii. Configure the DHCP pool toinclude the appropriate network address, the default gateway, andthe IP address of the DNS server.
iv. Configure hosts PC4 to receive IPaddress from a DHCP server.
b. Configure DHCPv4 on R1 VLAN 75 withthe addresses specified in the Addressing Table.
i. Configure R1 toexclude the first 50 addresses from the VLAN 75.
ii. Create a DHCP pool namedR1-VLAN75 (case-sensitive).
iii. Configure the DHCP pool toinclude the appropriate network address, the default gateway, andthe IP address of the DNS server.
iv. Configure hosts PC3 to receive IPaddress from a DHCP server.
Part 5: Configure DHCPv4
a. Configure DHCPv4 on R3 VLAN 85 withthe addresses specified in the Addressing Table.
i. Configure R3 toexclude the first 50 addresses from the VLAN 85.
ii. Create a DHCP pool namedR3-VLAN85 (case-sensitive).
iii. Configure the DHCP pool toinclude the appropriate network address, the default gateway, andthe IP address of the DNS server.
iv. Configure hosts PC4 to receive IPaddress from a DHCP server.
b. Configure DHCPv4 on R1 VLAN 75 withthe addresses specified in the Addressing Table.
i. Configure R1 toexclude the first 50 addresses from the VLAN 75.
ii. Create a DHCP pool namedR1-VLAN75 (case-sensitive).
iii. Configure the DHCP pool toinclude the appropriate network address, the default gateway, andthe IP address of the DNS server.
iv. Configure hosts PC3 to receive IPaddress from a DHCP server.
I want TopologyPIC
Topology 1 10.1.13.0/24 R1 GO/0/1.1/::1 2001:db8:acad:10d1::/64 PC1 G1/0/23 .50/::50 vlan 50 "Group50" G1/0/11 -13/::d1 D1 .1/::1 SO/1/1 Interface vlan 50 10.2.50.1/24 2001:db8:acad:1050::d1/64 Interface vlan 60 10.2.60.1/24 2001:db8:acad:1060::d1/64 G1/0/24 10.1.3.0/24 2001:db8:acad:1013::/64 PC2 .50/::50 vlan 60 "Group60" .3/::3 SO/1/1 Note: D2 is acting as a L2 switch G1/0/23 PC3 .50/::50 vlan 75 "Group75" R3 Interface GO/0/1.75 Supporting dot1q vlan 75 10.3.75.1/24 2001:db8:acad:3075::1/64 Interface GO/0/1.85 Supporting dot1q vlan 85 10.3.85.1/24 G1/0/11 2001:db8:acad:3085::1/64 Interface vlan 75 10.3.75.14/24 2001:db8:acad:3075::d2/64 GO/0/1- G1/0/24 PC4 .50/::50 vlan 85 "Group85"