Page 1 of 1
Current Attempt in Progress A double tee cross section is used for the beam shown below. Assume the following lengths an
Posted: Fri Jul 01, 2022 7:21 am
by answerhappygod
- Current Attempt In Progress A Double Tee Cross Section Is Used For The Beam Shown Below Assume The Following Lengths An 1 (177.1 KiB) Viewed 22 times
Current Attempt in Progress A double tee cross section is used for the beam shown below. Assume the following lengths and loads: a = 13 ft b = 7ft c = 12 ft P=19500 lb Q = 6000 lb The moment of inertia of the cross section is I₂ = 110 in.4. Determine the magnitude (i.e., the absolute value) of the maximum tensile bending stress in the beam. Answer: Omax (Tension) = i 1 B b C psi C D X y TT 5.8 in. 3.2 in. Attempts: 0 of 1 used Submit Answer