Page 1 of 1
7. Water at 10°C is flowing from point A to point B through the fabricated section shown below at the rate of 0.37 m3/s.
Posted: Fri Jul 01, 2022 6:57 am
by answerhappygod
- 7 Water At 10 C Is Flowing From Point A To Point B Through The Fabricated Section Shown Below At The Rate Of 0 37 M3 S 1 (33.29 KiB) Viewed 40 times
7. Water at 10°C is flowing from point A to point B through the fabricated section shown below at the rate of 0.37 m3/s. If the pressure at A is 66.2 kPa, calculate the pressure at B. Ans. 34.9 kPa 4.5m 2.4 m 600-mm inside diameter 3.6 m Flow 8. For the system shown below, calculate (a) the volume flow rate of water from the nozzle and (b) the pressure at point A. Ans. 58.1 kPa, 0.0213 m³/s/ T 300-mm inside diameter Water 160-mm OD x 5.5-mm wall Flow 50-mm diameter