A carbide tool with a rake angle of 10° was used to orthogonally cut an aluminium alloy workpiece. The cutting condition
Posted: Fri Jul 01, 2022 6:57 am
A carbide tool with a rake angle of 10° was used to orthogonally cut an aluminium alloy workpiece. The cutting conditions included the cutting speed of 150 m/min, the depth of cut of 80 um, and the width of cut of 5 mm, which resulted in the chip thickness of 100 um. The thrust and cutting forces were measured to be 180 N and 300 N, respectively. Determine