1. The hollow cylinder shown is made of wrapped steel plates, welded at the seams. The outside diameter is 1.06 m, with
Posted: Fri Jul 01, 2022 6:53 am
- 1 The Hollow Cylinder Shown Is Made Of Wrapped Steel Plates Welded At The Seams The Outside Diameter Is 1 06 M With 1 (42.97 KiB) Viewed 19 times
1. The hollow cylinder shown is made of wrapped steel plates, welded at the seams. The outside diameter is 1.06 m, with a wall thickness of 10 mm. A load of P = 2.2MN and a torque of T = 0.85 MN-m is applied. The seam angle is 30 degrees. Find: a. The normal stress perpendicular to the weld seams b. The shear stress parallel to the weld seams c. The principal stresses and maximum shear stress on the outside surface of the cylinder d. Draw a Mohr's circle and stress element with their corresponding orientations. Show all your work and state your assumptions. No credit will be given to answers without proper explanation/derivation T