Page 1 of 1
1) (25 points) For a horizontal geometry and the control volume shown in the following figure, the absolute pressure of
Posted: Fri Jul 01, 2022 6:39 am
by answerhappygod
- 1 25 Points For A Horizontal Geometry And The Control Volume Shown In The Following Figure The Absolute Pressure Of 1 (40.82 KiB) Viewed 17 times
1) (25 points) For a horizontal geometry and the control volume shown in the following figure, the absolute pressure of the water at the inlet is P1 =200 kPa, the inlet flow velocity is V₁ = 2 m/s, and the flow exits into the atmosphere at the exit. To hold this geometry stationary, calculate the following. h a) The magnitude of the holding force on the control volume. b) The direction of the holding force on the control volume in the x-y coordinate system. Assume atmospheric pressure is 100 kPa. V₂ 160 mm Section (2) 300 mm Water Section (1)