Page 1 of 1
Specify a pair of spur gears. input HP = 2 @ 100 RPM output speed = 133 RPM, shaft dia = 1.25" centre to centre distance
Posted: Wed Mar 30, 2022 10:00 am
by answerhappygod
- Specify A Pair Of Spur Gears Input Hp 2 100 Rpm Output Speed 133 Rpm Shaft Dia 1 25 Centre To Centre Distance 1 (43.94 KiB) Viewed 60 times
- Specify A Pair Of Spur Gears Input Hp 2 100 Rpm Output Speed 133 Rpm Shaft Dia 1 25 Centre To Centre Distance 2 (43.94 KiB) Viewed 60 times
Specify a pair of spur gears. input HP = 2 @ 100 RPM output speed = 133 RPM, shaft dia = 1.25" centre to centre distance should be 7.0"+0.25" heavy shock loads 18hrs a day lubrication is grease finished bore spur gears Determine the part numbers for the required spur gears. You are modifying a drive system for a stone crusher. Specify the worm gear reducer. 8 kW single cylinder internal combustion (I.C.) motor reduced from 1200 RPM to 96 rpm operation continuously for 18 hours per day, under 100° F summer temperatures The output will be connected to spur gear with a DP6, 14.4° pressure angle with 24 teeth. Determine the part number for the required bevel reducer.