Answer Happy

The Instructions Using cisco packet tracer network simulator, you must design and implement a local area network for a small and medium enterprise (SME). Below are the requirements of their LAN network. The LAN comprise of 4 network/subnet: 1. HQ Network a. Subnet: 192.168.2.0/24 b. Subnet Mask: 255.255.255.0 c. Number of Host: 12 (2 Printer, 5 Workstation, 5 Laptop) d. Printer and Workstation must be connected to "HQ Switch" using Wired Ethernet e. Laptop must be connected to network using Wireless Ethernet via Access Point 2. Penang Branch Network a. Subnet: 192.168.6.0/24 b. Subnet Mask: 255.255.255.0 c. Number of Host: 5 (1 Printer, 2 Workstation, 2 Laptop) d. Printer and Workstation must be connected to "Penang Switch" using Wired Ethernet e. Laptop must be connected to network using Wireless Ethernet via Access Point
3. Johor Branch Network a. Subnet: 192.168.8.0/24 b. Subnet Mask: 255.255.255.0 c. Number of Host: 6 (1 Printer, 2 Workstation, 3 Laptop) d. Printer and Workstation must be connected to "Johor Switch" using Wired Ethernet e. Laptop must be connected to network using Wireless Ethernet via Access Point 4. Data Centre Network a. Subnet: 192.168.10.0/24 b. Subnet Mask: 255.255.255.0 c. Number of Server Host: 5 d. The servers must host HTTP, HTTPS and FTP services e. All server must be connected to "Data Center Switch" using Wired Gigabit Ethernet Port. All the network must be connected to a "HQ Router" (Thus the HQ Router must have adequate port to connect all network together) and all network and equipment in this project must be labelled properly.