Page 1 of 1
A thin-walled cylindrical tube made of T4 temper 6061 Aluminum Alloy is closed at both ends and subjected to an internal
Posted: Fri Mar 04, 2022 10:13 am
by answerhappygod
- A Thin Walled Cylindrical Tube Made Of T4 Temper 6061 Aluminum Alloy Is Closed At Both Ends And Subjected To An Internal 1 (65.24 KiB) Viewed 39 times
A thin-walled cylindrical tube made of T4 temper 6061 Aluminum Alloy is closed at both ends and subjected to an internal pressure P = 3 MPa. A torque T= 500 Nm is also applied to the tube as shown in Fig. 1. The tube has an internal diameter d = 80 mm and a wall thickness t = 2 mm (the average diameter = 82 mm). T4 temper 6061 Aluminum Alloy has an ultimate tensile strength of 207 MPa and yield strength of 110 MPa. a) Calculate the tangential (hoop) and axial stresses in the tube. (5 points) b) Calculate the maximum torsional shear stress in the tube. (5 points) c) Sketch the stress state of a typical element in the wall of the tube. (5 points) d) Calculate the principal stresses and the maximum shear stress in the tube (5 points) c) Estimate the factor of safety based on the maximum shear stress theory and the distortion energy theory. (5 points) Р I С Side view Sectional view