Tensile test was conducted on a cylindrical metal specimen with initial diameter of 3.0mm. Parameters Specifications Gau
Posted: Sat Feb 19, 2022 3:32 pm
Tensile test was conducted on a cylindrical metal specimen
with initial diameter of 3.0mm.
Parameters
Specifications
Gauge length at fracture (mm)
20.5
Area of fracture surface (mm2)
15.8
Maximum load recorded (kN)
30.1
1. Calculate the % elongation of the specimen.
2. Calculate the ultimate tensile strength of the specimen.
with initial diameter of 3.0mm.
Parameters
Specifications
Gauge length at fracture (mm)
20.5
Area of fracture surface (mm2)
15.8
Maximum load recorded (kN)
30.1
1. Calculate the % elongation of the specimen.
2. Calculate the ultimate tensile strength of the specimen.