Page 1 of 1
A 3.0 inch diameter Titanium Alloy bar is being turned on a lathe. The depth of cut is 0.03 inch, the width of cut is 0.
Posted: Sat Feb 19, 2022 3:32 pm
by answerhappygod
- A 3 0 Inch Diameter Titanium Alloy Bar Is Being Turned On A Lathe The Depth Of Cut Is 0 03 Inch The Width Of Cut Is 0 1 (14.44 KiB) Viewed 57 times
A 3.0 inch diameter Titanium Alloy bar is being turned on a lathe. The depth of cut is 0.03 inch, the width of cut is 0.011 inch and the spindle rotates at 461 RPM. The specific energy of cutting for Titanium Alloy is 1.4 HP.min/cubic-inch. What is the required cutting power in Horsepower? Second place of decimal.