Page 1 of 1
8. Gear 2, in the figure, has 16 teeth, a 20° transverse pressure angle, a 15° helix angle, and a module of 4 mm. Gear 2
Posted: Sat Feb 19, 2022 3:31 pm
by answerhappygod
- 8 Gear 2 In The Figure Has 16 Teeth A 20 Transverse Pressure Angle A 15 Helix Angle And A Module Of 4 Mm Gear 2 1 (137.73 KiB) Viewed 86 times
8. Gear 2, in the figure, has 16 teeth, a 20° transverse pressure angle, a 15° helix angle, and a module of 4 mm. Gear 2 drives the idler on shaft b, which has 36 teeth. The driven gear on shaft c has 28 teeth. If the driver rotates at 1600 rev/min and transmits 6 kW, find the radial and thrust load on each shaft. LH 4 90° + + b с RH RH