Answer Happy

Posted: **Sat Feb 19, 2022 3:15 pm**

: Simple Stresses 340 Mm F F 150 Mm 3 Two Plates Are Connected By Bolts As Shown In The Figure Compute The Maximum Axi 1 (117.4 KiB) Viewed 54 times

SIMPLE STRESSES 340 mm F + F 150 mm 3. Two plates are connected by bolts as shown in the figure. Compute the maximum axial stress that each plate will handle. The allowable shear stress of each bolt is 50 MPa and the diameter of each bolt is 20 mm. F SHA 50 mm 340 mm

חד SIMPLE STRESSES 2. The puncher is to drive a 25 mm diameter hole to a steel plate. If the allowable axial stress of the puncher is limited to 101.85 MPa, determine the thickness (t) of the steel plate. The maximum shear stress of the steel plate is 50 MPa. D

SIMPLE STRESSES В. 1. Rod AB carries 500 kg cylinder at B, and it is supported by a hinge at A. Determine the minimum diameter of the bolt at A if the shear strength of the bolt is 40 MPa. Express the diameter in whole number. 60° A