Find the efficiency of the lap joint shown in Fig. 1. Given M16 bolts of grade 4.6 and Fe410 steel plates are used. pl
Posted: Sat Feb 19, 2022 3:14 pm
Find the efficiency of the lap joint shown in Fig. 1. Given M16 bolts of grade 4.6 and Fe410
steel plates are used.
please Solve this instead.
Evaluate the velocity and normal flow discharge in an earthern channel having the
geometric dimensions as: bottom width = 20 ft, side slopes 2H:1V at normal depth of 6 ft. Use (i)
G.K. Formula assuming Kutter's n = 0.022, (ii) Bazin formula, adopting an appropriate value of m.
Then compare the vales with that given by the Manning's formula (n = 0.022).
[8] 2. Find the efficiency of the lap joint shown in Fig. 1. Given M16 bolts of grade 4.6 and Fc410 steel plates are used. 10 mm 10 mm 40 mm 25 mm 25 mm 40 mm 40 mm 25 mm Fig.1
steel plates are used.
- Find The Efficiency Of The Lap Joint Shown In Fig 1 Given M16 Bolts Of Grade 4 6 And Fe410 Steel Plates Are Used Pl 1 (13.22 KiB) Viewed 55 times
Evaluate the velocity and normal flow discharge in an earthern channel having the
geometric dimensions as: bottom width = 20 ft, side slopes 2H:1V at normal depth of 6 ft. Use (i)
G.K. Formula assuming Kutter's n = 0.022, (ii) Bazin formula, adopting an appropriate value of m.
Then compare the vales with that given by the Manning's formula (n = 0.022).
[8] 2. Find the efficiency of the lap joint shown in Fig. 1. Given M16 bolts of grade 4.6 and Fc410 steel plates are used. 10 mm 10 mm 40 mm 25 mm 25 mm 40 mm 40 mm 25 mm Fig.1