Flow loop problem: A fluid with a 𝜌=850 kg/m3; and 𝜇=1.0* 0−3 Pa s flows out of the pump at a rate of 8m
Posted: Thu Feb 17, 2022 11:08 am
Flow loop problem:
A fluid with a 𝜌=850 kg/m3; and 𝜇=1.0* 0−3 Pa s flows out of the
pump at a rate of 8ml/min.
Note: The flow leading to both sensors is equal, flow into
the connector is laminar and the Reynolds number in the tubes
leading to each sensor is ≥ 20. What is the largest diameter to
achieve the following flow requirements. (Diameter =3mm, or 8mm or
12mm)
a) from the pump to connector
b) from connector to sensor
tank Eube dund connector sensor sensor
- 1 (45.55 KiB) Viewed 20 times
pump at a rate of 8ml/min.
Note: The flow leading to both sensors is equal, flow into
the connector is laminar and the Reynolds number in the tubes
leading to each sensor is ≥ 20. What is the largest diameter to
achieve the following flow requirements. (Diameter =3mm, or 8mm or
12mm)
a) from the pump to connector
b) from connector to sensor
tank Eube dund connector sensor sensor