Page 1 of 1
(b) Draw the PLC input wiring and PLC output wiring for all the input and output devices shown in ladder diagram Figure
Posted: Sat Jun 18, 2022 9:10 am
by answerhappygod
- B Draw The Plc Input Wiring And Plc Output Wiring For All The Input And Output Devices Shown In Ladder Diagram Figure 1 (38.8 KiB) Viewed 9 times
(b) Draw the PLC input wiring and PLC output wiring for all the input and output devices shown in ladder diagram Figure 1 below. The PLC used is CS1G with sinking Input Module and Relay Output Module 0.05 0.07 HH START 2 START 1 SET Set 1.02 KM1 Bit 0.10 + STOP BUTTON RSET Reset 1.02 KM1 Bit Figure 1: Ladder diagram for PLC application. (4 marks, C3) (c) Construct Instruction list table for ladder diagram in Figure 2: 0.02 0.04 ㅓㅏ START STOP 17.00 HH 17.00 0.11 0.12 TO010 +- M S1 S2 1.05 11- KM1 0.13 S3 Figure 2: Industrial Automation application using ladder diagram. 17.00 1.06 TIM 0010 # 100 KM1 100ms Timer Timer number Set value