Consider the following circuit used to provide power for an inductive RL load. The input voltage is VS=150V and the load
Posted: Fri Jan 21, 2022 8:45 am
Consider the following circuit used to provide power for an inductive RL load. The input voltage is VS=150V and the load has a 3Ω impedance value. The thyristor is working at a frequency fS = 2 kHz. The discharge current is to be limited to 50A and the required dv/dt is 50V/μs. If the value of CS is equal to 0.158µF, then the snubber losses are equal to:
4.56W
5.45W
3.56W
2.56W
L Cs T: 实 RS Vs M R R
4.56W
5.45W
3.56W
2.56W
L Cs T: 实 RS Vs M R R