A sample is subjected to a 33.5 kN tensile load. This results in an elastic deformation only (engineering strain = 0.004
Posted: Wed Jun 08, 2022 8:58 am
A sample is subjected to a 33.5 kN tensile load. This results in
an elastic deformation only (engineering strain = 0.00405). The
length of the material is 12.7 mm. If the material has a
rectangular cross-section, calculate the width in mm.
an elastic deformation only (engineering strain = 0.00405). The
length of the material is 12.7 mm. If the material has a
rectangular cross-section, calculate the width in mm.