Page 1 of 1
12. A typical aluminum-alloy scuba diving tank is shown in Fig. 12. The outside diameter of the tank is 201 mm. and the
Posted: Wed Jun 08, 2022 8:57 am
by answerhappygod
- 12 A Typical Aluminum Alloy Scuba Diving Tank Is Shown In Fig 12 The Outside Diameter Of The Tank Is 201 Mm And The 1 (14.24 KiB) Viewed 17 times
12. A typical aluminum-alloy scuba diving tank is shown in Fig. 12. The outside diameter of the tank is 201 mm. and the wall thickness is 13 mm. If the air in the tank is pressurized to 21 MPa determine: (a) the longitudinal and hoop stresses in the wall of the tank. (b) the maximum shear stress in the plane of the cylinder wall. (c) the absolute maximum shear stress on the outer surface of the cylinder wall.