The 15-foot-long 1-inch Schedule 40 pipe has three 90-degree elbows and an orifice for flow measurement. Orifice Diamete
Posted: Tue Jun 07, 2022 6:04 pm
The 15-foot-long 1-inch Schedule 40 pipe has three 90-degree
elbows and an orifice for flow measurement. Orifice Diameter is
determined to be = 1/2. The pressure difference was measured as 2.1
Mpa in the manometer located between the orifice inlet and outlet.
It is transferred to a pressure tank with 1 bar gauge at 21
degrees. The fluid properties in accordance with the exponential
rule were measured in a capillary viscometer. Measure K'=0.1,
n'=0.35 and 1 inch pipe by taking the average velocity of 5
m/s.
a-Schematic representation
b- Flow behavior determination
c-Calculation of friction loss
d-Calculation of pump power e- Calculation of pump brake power (for
60% efficiency)
elbows and an orifice for flow measurement. Orifice Diameter is
determined to be = 1/2. The pressure difference was measured as 2.1
Mpa in the manometer located between the orifice inlet and outlet.
It is transferred to a pressure tank with 1 bar gauge at 21
degrees. The fluid properties in accordance with the exponential
rule were measured in a capillary viscometer. Measure K'=0.1,
n'=0.35 and 1 inch pipe by taking the average velocity of 5
m/s.
a-Schematic representation
b- Flow behavior determination
c-Calculation of friction loss
d-Calculation of pump power e- Calculation of pump brake power (for
60% efficiency)