Page 1 of 1
A conveyor is used to drive the inertial load of 0.02 kg m² in the required speed range with a brushless DC motor and a
Posted: Tue Jun 07, 2022 5:15 pm
by answerhappygod
- A Conveyor Is Used To Drive The Inertial Load Of 0 02 Kg M In The Required Speed Range With A Brushless Dc Motor And A 1 (348.78 KiB) Viewed 66 times
A conveyor is used to drive the inertial load of 0.02 kg m² in the required speed range with a brushless DC motor and a gearhead having reduction ratio of 15:1 as shown in the figure below. The belt speed is V=1 m/s and the roller diameter is D=0.1 m. Choose the correct
statement. V Load Motor Right Angle Gearhead O The rotation speed of the motor shaft is 1665 RPM O The moment of inertia of the load referred to the motor shaft is 0.00133 kg m² O The moment of inertia of the load referred to the motor shaft is 0.0133 kg•m² O The rotation speed of the gear shaft is 100 RPM O The rotation speed of the motor shaft is 2865 RPM.