Page 1 of 1
$100 80 901 80 10kW 50 200 50 100 110 3) (40%) As shown in the above figure the electrical motor is connected to a gear
Posted: Tue Jun 07, 2022 2:21 pm
by answerhappygod
- 100 80 901 80 10kw 50 200 50 100 110 3 40 As Shown In The Above Figure The Electrical Motor Is Connected To A Gear 1 (50.17 KiB) Viewed 32 times
$100 80 901 80 10kW 50 200 50 100 110 3) (40%) As shown in the above figure the electrical motor is connected to a gear box through a clutch. The motor shaft runs at 40 rev/s in the CW direction and delivers 10 kW to the gear. The helical gear has a normal pressure angle of 20°, a helix angle of 30° and a normal module (m) of 2.0 mm. Spur gears have 20° full-depth involute (FDI) profiles and a module of 2.5 mm. The bevel gears have a module of 5 mm. The thrust loads are taken by bearings A, D, G and M. Determine; a) All dimensions of spur pinion. b) The overall efficiency of the gearbox if efficiency values are; 96% for helical set, 98% for spur set and 97% for bevel set. c) The output speed and torque. -~× × × × 40T X 60 20TC 36T B H 115T Clutch D F 18T EX XL 50T