Consider a cold air-standard Diesel cycle. Operating data at principal States in the cycle are given in the table below.
Posted: Tue Jun 07, 2022 1:38 pm
- Consider A Cold Air Standard Diesel Cycle Operating Data At Principal States In The Cycle Are Given In The Table Below 1 (8.93 KiB) Viewed 28 times
principal States in the cycle are given in the table below. The
States are
numbered with p1 = 100 kPa, T1 =340 K, and T3 = 4850.3 K, r = 15
and rc =2. For n=1.3, cv =0.718 kJ/kg-K, and cp =1.005kJ/kg-K
a. Determine the heat transfer during heat addition process per
unit mass in kJ,kg
b. Determine p2 in Kpa
c. Determine T2 in K
Determine T4 in K
Consider a cold air-standard Diesel cycle. Operating data at principal States in the cycle are given in the table below. The States are numbered with p1 = 100 kPa, T1 =340 K, and T3 = 4850.3 K, r = 15 and rc=2. For n=1.3, cv =0.718 kJ/kg-K, and cp =1.005kJ/kg-K a. Determine the heat transfer during heat addition process per unit mass in kj.kg b. Determine p2 in Kpa C. Determine T2 in K Determine T4 in K d.