Page 1 of 1
A 16 bits digital data, X, is to be transmitted to another KL25 microcontroller using the half duplex mode of its UARTO
Posted: Mon Jun 06, 2022 12:34 pm
by answerhappygod
- A 16 Bits Digital Data X Is To Be Transmitted To Another Kl25 Microcontroller Using The Half Duplex Mode Of Its Uarto 1 (161.9 KiB) Viewed 42 times
A 16 bits digital data, X, is to be transmitted to another KL25 microcontroller using the half duplex mode of its UARTO module. The UARTO frame consists of 1 start bit, 1 stop bit, one parity bit, and 8 bits data. The transmission speed is 4800 Bauds. Assume that the UARTO module is configured for even parity. What would be the value of the paly bit corresponding to X = 597 (decimal value) Parity bit corresponding to the highest byte of X is: Parity bit corresponding to the lowest byte of X is: What would be the maximal sampling rate (in samples/second) you should set for the ADC module which generates the digital value X in order to transmit every sample using the UARTO module as configured *********