2. A design specification was given by a client to you: i. If inputs X1 and X3 are on, then outputs Y0 and Y3 should be
Posted: Thu Jun 02, 2022 10:06 am
2. A design specification was given by a client to you:
i. If inputs X1 and X3 are on, then outputs Y0 and Y3 should be
on.
ii. If inputs X6 and X13 but not X1 are on, then Y2 should be
on.
iii. If either input X2 is pressed 20 times or input X12 is
pressed 6 times, then output Y7 should be on.
iv. If either output Y7 or Y2 is on for 50 continuous seconds,
then output Y1 should come on and stay on until input X12 is
pressed. Create the input-output table for the specifications and
interpret the specifications into a ladder logic diagram.
i. If inputs X1 and X3 are on, then outputs Y0 and Y3 should be
on.
ii. If inputs X6 and X13 but not X1 are on, then Y2 should be
on.
iii. If either input X2 is pressed 20 times or input X12 is
pressed 6 times, then output Y7 should be on.
iv. If either output Y7 or Y2 is on for 50 continuous seconds,
then output Y1 should come on and stay on until input X12 is
pressed. Create the input-output table for the specifications and
interpret the specifications into a ladder logic diagram.