Develop a MATLAB code to solve the power flow problem of the system in Figure 1 with NEWTON RAPHSON METHOD using genera
Posted: Thu Jun 02, 2022 8:50 am
Develop a MATLAB code to solve the power flow problem of the
system in Figure 1 with NEWTON RAPHSON METHOD using
generator load data from Table 1. Use a base of 100MVA with
stopping criterion 𝜖 =10-5 .
Begin with a flat voltage profile. Provide the code then fill the
table below with the voltage found.
system in Figure 1 with NEWTON RAPHSON METHOD using
generator load data from Table 1. Use a base of 100MVA with
stopping criterion 𝜖 =10-5 .
Begin with a flat voltage profile. Provide the code then fill the
table below with the voltage found.