Answer Happy

10-Connect Sine wave module to Continuous Derivative module, the output of this one need to be connected to Gain1 module, the output of this one need to be connected to second input of the mux module 11- Connect Sine wave module to Continuous integrator module, the output of this one need to be connected to Gain2 module, the output of this one need to be connected to third input of the mux module 12- The output of the mux module needs to be connected to scope 13- Simulation start time: 0.1, Stop time: 10, Solver type: fixed-step, Solver: ode3, fixed-step size: auto. ** 044 folder
Use Simulink Toolbox and follow these steps to make modelling & simulation of below application: 1- Open new Simulink model 2- Add sine wave module (Amplitude: 300*sqrt (2), frequency: 2*pi*50, Phase: pi/2) 3- Add Gain module named "Gain 1" with 0.1 as value 4- Add Continuous integrator module 5- Add Continuous Derivative module 6- Add Gain module named "Gain2" with 10 as value 7- Add Mux module with 3 input ports 8- Add Scope 9- Connect the Sine wave module to first input of mux module