Kindly answer them all asap and correctly for an upvote. Thank you. 3. Compute for the tension load, T in kN that can be
Posted: Tue May 24, 2022 10:50 am
Kindly answer them all asap and correctly for an upvote. Thank you.
3. Compute for the tension load, T in kN that can be applied in the 8mm thk plate considering the staggered holes.4. Compute for the tension load, T in kN that can be applied in the 2-6mm thk plate considering the staggered holes.5. Compute for the radius of gyration, r of the pipe section with cross-bracing plates.
3. Compute for the tension load, T in kN that can be applied in the 8mm thk plate considering the staggered holes.
4. Compute for the tension load, T in kN that can be applied in the 2-6mm thk plate considering the staggered holes.
5. Compute for the radius of gyration, r of the pipe section with cross-bracing plates.
Use 3 decimals. Compute for the safe value of tension load, T in kN that can be applied in the system as shown below. Use Fy = 200 Mpa and Fu = 420 Mpa 25 mm 2-6mm thk plate T 200 dia x 10mm thk steel pipe 8mm thk plate 125 mm 1.25 m use bolt hole dia = 22mm Đ
3. Compute for the tension load, T in kN that can be applied in the 8mm thk plate considering the staggered holes.4. Compute for the tension load, T in kN that can be applied in the 2-6mm thk plate considering the staggered holes.5. Compute for the radius of gyration, r of the pipe section with cross-bracing plates.
3. Compute for the tension load, T in kN that can be applied in the 8mm thk plate considering the staggered holes.
4. Compute for the tension load, T in kN that can be applied in the 2-6mm thk plate considering the staggered holes.
5. Compute for the radius of gyration, r of the pipe section with cross-bracing plates.
- Kindly Answer Them All Asap And Correctly For An Upvote Thank You 3 Compute For The Tension Load T In Kn That Can Be 1 (42.25 KiB) Viewed 8 times