Page 1 of 1
QUESTION 2 (10 MARKS) The tension member is fastened together using two bolts, one on each of the member as shown in Fig
Posted: Sat May 21, 2022 5:04 pm
by answerhappygod
- Question 2 10 Marks The Tension Member Is Fastened Together Using Two Bolts One On Each Of The Member As Shown In Fig 1 (23.39 KiB) Viewed 15 times
QUESTION 2 (10 MARKS) The tension member is fastened together using two bolts, one on each of the member as shown in Figure 2. Each bolt has a diameter of 8 mm, determine the maximum load P that can be applied to the member if the allowable shear stress for the bolt is Tattow = 120 MPa and the allowable average normal stress is atrow = 200 MPa. 60° Figure 2 (10 marks)