S CI C2 C3 C4 GI 3 CS (typ) C6 C7 C8 Given: L = 25' (typ.) and S = 10' (typ.). So, the overall floor plan = 75' x 60 The
Posted: Sat May 21, 2022 1:50 pm
- S Ci C2 C3 C4 Gi 3 Cs Typ C6 C7 C8 Given L 25 Typ And S 10 Typ So The Overall Floor Plan 75 X 60 The 1 (55.15 KiB) Viewed 16 times
The beams, e.g., B1 (typ.), are also cast with fi' = 5,000 psi (normal weight concrete, 150 pcf. B: = 0.8). Use d = n-3", for both positive and negative bending. (a) (10 points) Determine per AC1318 the effective flange width (be or b) of a typical beam, B1, subjected to positive bending. (b) (20 points) Use where applicable a be (or b) of 76-in [i.e., ignore the one calculated in part (a)], compute the minimum flexural reinforcement required (i.e., As min) and its corresponding design bending (M) of B1 for positive bending only. (c) (20 points) Use where applicable a be (or b) of 76-in [i.e., ignore the one calculated in part (a)], compute the maximum flexural reinforcement required (i.e., Asmax) and its corresponding design bending (Mn) of B1 for positive bending only. Use & = 0.005. Bonus credit*: (d) (10 points) If No. 4 U-stirrups at 8" on-center are used for B1, determine the design shear capacity (V.) of the beam.