Answer Happy

Posted: **Sat May 21, 2022 1:37 pm**

: Use The Following Information For Problems 1 6 A Building Used As A Storage Facility Shown Below Is Assigned A Seismic D 1 (29.47 KiB) Viewed 18 times

: Use The Following Information For Problems 1 6 A Building Used As A Storage Facility Shown Below Is Assigned A Seismic D 2 (8.26 KiB) Viewed 18 times

Use the following information for Problems 1-6 A building used as a storage facility shown below is assigned a Seismic Design Category (SDC) E, and blocked diaphragm. The lateral seismic force in East-West direction was found to be 500 plf at Strength Design (SD) force level. Roof: DL - 20 psf, \" Structural I plywood with 10d nails Walls: DL= 15 psf," Structural I plywood with 10d nails ® W SECTION 5.5 PLAN
4- Assuming a calculated unit wall shear of 800 plf on line “E” at Strength Design (SD) force level, determine the shearwall nail spacing per SDPWS.