Page 1 of 1
1. Compute the maximum allowable compressive load that a steel pipe pile (0508mm, t=9.5mm). The yield strength of steel
Posted: Sat May 21, 2022 1:12 pm
by answerhappygod
- 1 Compute The Maximum Allowable Compressive Load That A Steel Pipe Pile 0508mm T 9 5mm The Yield Strength Of Steel 1 (95.1 KiB) Viewed 21 times
1. Compute the maximum allowable compressive load that a steel pipe pile (0508mm, t=9.5mm). The yield strength of steel is 400MPa and f;=0,5fy. 2. Determine the allowable load carrying capacity of the pile shown below. The average unit skin resistance is 1.2kN/m², and the unit point resistance is 30kN/m² Use FS-3.0. GL 10m Concrete pile 250mm x 250mm 3. Determine the length, L, required to support the load shown below. The diameter of the steel pipe pile (closed end) is 508mm and the thickness of the steel pipe 9.5mm. Use an a-method to evaluate skin resistance in clay layers. Use FS=4.0. 700KN 5m Soft clay C-30kPa Y = 16.5kN/m2 a=0.82 LE? Stiff clay C-60kPa Ysat = 17.5kN/m3 a= 0.62