Determine the number of V-belts required for a 95kW engine with a 280-mm driving pulley running at 1000rpm. The driven p
Posted: Sat May 21, 2022 12:05 pm
Determine the number of V-belts required for a 95kW engine with
a 280-mm driving pulley running at 1000rpm. The driven pulley is
950mm away from the driving pulley and is rotating at 400rpm. The
pulleys have a 39 degrees groove angle. The permissible stress in a
400 mm2 cross-sectional area of belt is 2MPa. The coefficient of
friction is 0.25 and the density of belt material is
1200kg/m3.
.
a 280-mm driving pulley running at 1000rpm. The driven pulley is
950mm away from the driving pulley and is rotating at 400rpm. The
pulleys have a 39 degrees groove angle. The permissible stress in a
400 mm2 cross-sectional area of belt is 2MPa. The coefficient of
friction is 0.25 and the density of belt material is
1200kg/m3.
.