Section Flow Check the box Flux meter. Move the cross section ring closer to the left pipe, Widen the pipe (click and dr
Posted: Sat May 21, 2022 10:32 am
Section Flow
Check the box Flux meter. Move the cross section ring closer to
the left pipe, Widen the pipe (click and drag an upper handle) to
an area of around 12m2.
Do not change pipes (do not touch the handles on the yellow
pipes). Measure the speed of flow at this cross section and the
pressure (at the center of the pipe flow).
Move the ring closer to the right pipe. Make the pipe narrower.
Measure the Area, the speed and the pressure.
(Pipes remain at the same level and y1=y2 as long as the
measurements made at the same level in the pipe)
Check the formula of the continuity equation and Bernoulli
equation.
Section Water tower
Check the bullet Match leakage, open the hole at the bottom of
the tank. Measure the pressure at the bottom of the tank and the
speed of flow. Change the density of the liquid. Do the pressure
and the speed change? Explain.
Using Phet colorado simulator online
Check the box Flux meter. Move the cross section ring closer to
the left pipe, Widen the pipe (click and drag an upper handle) to
an area of around 12m2.
Do not change pipes (do not touch the handles on the yellow
pipes). Measure the speed of flow at this cross section and the
pressure (at the center of the pipe flow).
Move the ring closer to the right pipe. Make the pipe narrower.
Measure the Area, the speed and the pressure.
(Pipes remain at the same level and y1=y2 as long as the
measurements made at the same level in the pipe)
Check the formula of the continuity equation and Bernoulli
equation.
Section Water tower
Check the bullet Match leakage, open the hole at the bottom of
the tank. Measure the pressure at the bottom of the tank and the
speed of flow. Change the density of the liquid. Do the pressure
and the speed change? Explain.
Using Phet colorado simulator online