Page 1 of 1
A solenoid inductor is required to be densely wound with a wire of 1 mm in diameter, with a cross-section of 50 mm2 and
Posted: Sat May 21, 2022 12:26 am
by answerhappygod
- A Solenoid Inductor Is Required To Be Densely Wound With A Wire Of 1 Mm In Diameter With A Cross Section Of 50 Mm2 And 1 (36.91 KiB) Viewed 23 times
A solenoid inductor is required to be densely wound with a wire of 1 mm in diameter, with a cross-section of 50 mm2 and a length of 10 mm, and a current flowing through it of 1 A. Find a) The net magnetic flux crosses the solenoid coil b) Value of inductance (L) of the solenoid coil. c) The energy (W from the magnetic field) accumulated in the solenoid coil. d) In case of wanting to increase the value of L, what is the method? Explain.