Design an FIR filter, with the following characteristics: that it eliminates the frequency component w=2pi /3 , that its
Posted: Fri May 20, 2022 9:30 pm
Design an FIR filter, with the following characteristics: that it eliminates the frequency component w=2pi /3 , that its frequency response is normalized so that |H(0)|=1. To do this, use the following equation:
At the end of the design of the FIR filter:
a) Plot the frequency components of the transfer function H(z).
b) filter the 'ecg.mat' signal, contained in the Partial signals folder. (Plot the original signal and the filtered signal in the same figure, use legend to identify the signals.
І - изхiq + (І - иjxta + (и јxtq = (u)
- Design An Fir Filter With The Following Characteristics That It Eliminates The Frequency Component W 2pi 3 That Its 1 (30.81 KiB) Viewed 19 times
a) Plot the frequency components of the transfer function H(z).
b) filter the 'ecg.mat' signal, contained in the Partial signals folder. (Plot the original signal and the filtered signal in the same figure, use legend to identify the signals.
І - изхiq + (І - иjxta + (и јxtq = (u)