Answer Happy

Problem 5 (21 points): Power consumption In this problem, you will calculate the switching power associated with nodes A, B and C in the dashed box of the figure below. Assume that the delay of every gate is 0 (thus there are no glitches at A, B and C). The capacitance at each node is specified in the figure. ENIDO Latch Given: VDD IV Frequency of CLK signal - 1GHZ EN2 DO Latch 6 IF <--<--> 8 FF с 1 GHZ D Q Q 2 ff 11 CLK ACIK a) Assume EN1 EN20. Fill in the table below, without the unit specifcations. For example, if the switching power is 0.5W. just type in 0.5

) A ENTEN2 - Fin the table below, without the unit speciation For the 0.5W, just type in 0.5 A B Activity factor a Switching power (W) Total switching power associated with all 3 nodes (W) b) Assume EN1 - 1 and EN2 -0. Fill in the table below, without the unit specifications. For example, if the switching 0.5uW, just type in 0.5 B A Activity factor a