Page 1 of 1
Calculate the P, and overpressure parameter 1 = P/S, with $ = 0.298. The total depth is 2000 m and the water depth is 50
Posted: Wed May 18, 2022 3:43 pm
by answerhappygod
- Calculate The P And Overpressure Parameter 1 P S With 0 298 The Total Depth Is 2000 M And The Water Depth Is 50 1 (31.64 KiB) Viewed 44 times
Calculate the P, and overpressure parameter 1 = P/S, with $ = 0.298. The total depth is 2000 m and the water depth is 500 m. Consider a lithostatic gradient of 22 MPa/km below the seafloor. Based on the experimental data, we know: B = 3.2 x 10-2 MPa and 40 = 0.38. How much higher than the expected hydrostatic value is the pore pressure? (hint: calculate the total vertical stress first, calculate the effective vertical stress using og pore pressure using the relevant equation, and finally calculate the overpressure parameter) In(€100), calculate the 8