Answer Happy

red A certain half-reaction has a standard reduction potential = -0.84 V. An engineer proposes using this half-reaction at the anode of a galvanic cell that must provide at least 1.50 V of electrical power. The cell will operate under standard conditions Note for advanced students: assume the engineer requires this half-reaction to happen at the anode of the cell. 0-00 -- yes, there is a minimum. Ford 00V Is there a minimum standard induction potential that the hall reaction used at the othede of this cell can have Iso check the "yes" box and calculate them Round your answer to 2 decimal places. If there is no lower lurt, check the "no hox O nomimum x X 6 2 yer, there is a maximum red Is there a maximum standard reduction potential that the haireaction used at the cathode of this cell can have? If so, check the "yes" box and calculate the maximum Found your answer to 2 decimal places. If there is no per bet, check the above Dy using the information in the ALEKS Datatab, write a balanced equation describing what eaction that could be used at the cathode of this cell Note: in the half reaction would actually occur at the cathode