Page 1 of 1
For the cantilever beam shown: 1. Calculate the shear force, bending moment, and axial forces at section c-c. 2. Based o
Posted: Mon May 16, 2022 12:22 pm
by answerhappygod
- For The Cantilever Beam Shown 1 Calculate The Shear Force Bending Moment And Axial Forces At Section C C 2 Based O 1 (41.6 KiB) Viewed 53 times
For the cantilever beam shown: 1. Calculate the shear force, bending moment, and axial forces at section c-c. 2. Based on the forces obtained from above, determine the normal and shear stresses acting on the point (A). Draw these stresses on a differential element. Use: 1 = 61.87 x 106 mm QA = 220 x 108mmand = with t=20mm 3. For the differential element obtained from above, determine the principal stresses at point A and their orientations and draw the resulted element. Calculate the maximum in-plane shear stress also -0.33m + -2.67 60 KN © -- 20 mm 200 mm NA 0.12m 20 mm 80 KN -100 mm © 1) Forces at the section c-c