Page 1 of 1
In a single pass rolling operation, a 10 mm thick plate with plate width of 300 mm is reduced to 9 mm. The roller radius
Posted: Mon May 16, 2022 7:08 am
by answerhappygod
- In A Single Pass Rolling Operation A 10 Mm Thick Plate With Plate Width Of 300 Mm Is Reduced To 9 Mm The Roller Radius 1 (24.07 KiB) Viewed 59 times
In a single pass rolling operation, a 10 mm thick plate with plate width of 300 mm is reduced to 9 mm. The roller radius is 200 mm and rotational speed is 10 rpm. The average flow stress of the material is 300 MPa. The power required for the rolling operation is close to O 9.4 KW O 4.7 kW O 7.9 KW O 8.5 kW