Page 1 of 1
14. A ball screw for a machine table drive is to be selected. The axial force to be transmitted by the screw is 600 lb.
Posted: Sun May 15, 2022 11:51 pm
by answerhappygod
- 14 A Ball Screw For A Machine Table Drive Is To Be Selected The Axial Force To Be Transmitted By The Screw Is 600 Lb 1 (48.98 KiB) Viewed 40 times
14. A ball screw for a machine table drive is to be selected. The axial force to be transmitted by the screw is 600 lb. The table moves 24 in per cycle, and it is expected to cycle 10 times per hour for a design life of 10 years. Select an appropriate screw. 15. For the screw selected in Problem 14, compute the torque required to drive the screw. 16. For the screw selected in Problem 14, the normal travel speed of the table is 10.0 in/min. Compute the power required to drive the screw. 17. If the cycle time for the machine in Problem 14 were decreased to obtain 20 cycles/h instead of 10, what would be the expected life in years of the screw originally selected?