Page 1 of 1
2 . A circular bar has a total length of L = 5m. As shown in Fig Q2, the cross-section of the bar changes at the length
Posted: Sun May 15, 2022 11:03 pm
by answerhappygod
- 2 A Circular Bar Has A Total Length Of L 5m As Shown In Fig Q2 The Cross Section Of The Bar Changes At The Length 1 (110.54 KiB) Viewed 46 times
2 . A circular bar has a total length of L = 5m. As shown in Fig Q2, the cross-section of the bar changes at the length LAB = 4m. The cross-sections have a diameter of daß = 250mm and dec = 125mm. According to Fig Q2, the bar is firmly supported at both ends. The applied torque T is T = 100kNm. For the shear modulus use G =75 GPa. (a) Calculate the maximum stress in the bar. (b) Calculate the angle of twist at location B, where T is applied. 100kNm Diameter 250mm В. Diameter 125mm 4.0m 1.0m Figure Q2: Circular bar with applied torque.