Page 1 of 1
2. A circular bar has a total length of L = 5m. As shown in Fig Q2, the cross-section of the bar changes at the length L
Posted: Sun May 15, 2022 10:40 pm
by answerhappygod
- 2 A Circular Bar Has A Total Length Of L 5m As Shown In Fig Q2 The Cross Section Of The Bar Changes At The Length L 1 (44.41 KiB) Viewed 62 times
2. A circular bar has a total length of L = 5m. As shown in Fig Q2, the cross-section of the bar changes at the length LAB = 4m. The cross-sections have a diameter of daß = 250mm and dec = 125mm. According to Fig Q2, the bar is firmly supported at both ends. The applied torque T is T = 100kNm. For the shear modulus use G =75 GPa. (a) Calculate the maximum stress in the bar. (25 marks) b) Calculate the angle of twist at location B, where T is applied. (5 marks) 100kNm Diameter 250mm В. Diameter 125mm F 4 4.Om 1.Om Figure Q2: Circular bar with applied torque.