Page 1 of 1
An extruder barrel has a diameter of 247 inches and a length of 42 inches. The screw rotates at 63 revolutions per minut
Posted: Sun May 15, 2022 10:38 pm
by answerhappygod
- An Extruder Barrel Has A Diameter Of 247 Inches And A Length Of 42 Inches The Screw Rotates At 63 Revolutions Per Minut 1 (10.37 KiB) Viewed 39 times
An extruder barrel has a diameter of 247 inches and a length of 42 inches. The screw rotates at 63 revolutions per minute. The screw channel depth 0.25 in, and the flight angle = 19.4 degrees. The head pressure at the die end of the barrel is 854 lbs/in2 The viscosity of the polymer molt is given as 121 x 1042 Calculate the volume flow rate in insec of the plastic through the barrel Hint: You may want to use Eq 13.13 in the textbook which is a more direct approach compared to the equation in the class notes