A multiple disc clutch is used to operate the speed regulating gears of lathe. If the torque delivered by the clutch is
Posted: Sun May 15, 2022 9:28 pm
A multiple disc clutch is used to operate the speed regulating
gears of lathe. If the torque delivered by the clutch is 400
lbs.∙in., evaluate the number of discs are necessary and the
max. force acting on them while the clutch is in operation. Limit
the disc friction surface sizes between 5
in. and 3 in. Take the factor
of safety as 2, coefficient of friction varies from
0.150 to 0.200, and the pressure as
99.99psi.
Notes:
- Never change the template and only write your own
identity data.
- Take at least 3 digits after the decimal
point.
- Specify the units.
gears of lathe. If the torque delivered by the clutch is 400
lbs.∙in., evaluate the number of discs are necessary and the
max. force acting on them while the clutch is in operation. Limit
the disc friction surface sizes between 5
in. and 3 in. Take the factor
of safety as 2, coefficient of friction varies from
0.150 to 0.200, and the pressure as
99.99psi.
Notes:
- Never change the template and only write your own
identity data.
- Take at least 3 digits after the decimal
point.
- Specify the units.