Page 1 of 1
B Problem 1 A 30 MVA, 33/11 kV transformer with OLTC of +12.5% in steps of 2.5% in its primary side is used to supply a
Posted: Sun May 15, 2022 3:28 pm
by answerhappygod
- B Problem 1 A 30 Mva 33 11 Kv Transformer With Oltc Of 12 5 In Steps Of 2 5 In Its Primary Side Is Used To Supply A 1 (20.96 KiB) Viewed 53 times
B Problem 1 A 30 MVA, 33/11 kV transformer with OLTC of +12.5% in steps of 2.5% in its primary side is used to supply a load of 20 MW with 0.8 power factor lagging. The transformer 38 reactance is 20% on its ratings. The feeder impedance is ZAB = 3 +j2 . a) Calculate the voltage at bus A to achieve a line voltage of 11 kV at bus B. b) Discuss the tap setting assuming that the primary voltage of the transformer is 33 kv. Load