1 I Branch system is in the same horizontal plane 3-in 15 ft Side view Pump Flow 415 ft Water at 160° F is drawn at a
Posted: Mon May 09, 2022 9:59 am
- 1 I Branch System Is In The Same Horizontal Plane 3 In 15 Ft Side View Pump Flow 415 Ft Water At 160 F Is Drawn At A 1 (240.26 KiB) Viewed 25 times
- 1 I Branch System Is In The Same Horizontal Plane 3 In 15 Ft Side View Pump Flow 415 Ft Water At 160 F Is Drawn At A 2 (246.09 KiB) Viewed 25 times
Water at 160° F is drawn at a rate of 275 gal/min from the tank. The suction line is 4in in diameter and is 10 ft long in total; the discharge line is 3in in diameter and is 40 ft long in total. The discharge line splits into two branches as shown in figure. The heat exchanger has a k-12. The total length of the pipe containing the heat exchanger is 8 ft. The lin line is 30 ft long. The two lines connects to a single short pipe and discharge into the atmosphere. All pipes are 40 schedule steel. Find: . . . Select the correct commercially available pump for this system using Hydrofle Find the losses of the whole system. Find the loss in the heat exchanger branch. Display results as a table made from Hydroflg data. Find the total pump head Gate valve Gate valve 14-in 3-in 3-In Heat exchanger K=12 Pump KO 3X1qh Tank Globe valve Gate valve Check Gate valve valve I-in Riser Plan view